IT5050 galvanic Isolation Transformer
ApexRadio IT5050 galvanic Isolation Transformer
The IT5050 is an isolation transformer that can significantly reduce locally-produced
noise by breaking up the common mode noise path (the ground loop effect
between antenna and receiver). It's fitted with BNC connectors. IT5050
has excellent wide band characteristics and can be used from LW to VHF.
Typical noise soursces are switching power supplies such as those used
for receivers and PCs. IT5050 will break the ground loop and isolation
filter the noise out of the signal before it reaches the antenna input
of receivers. Protect the receiver from electrostatic discharges from the
antenna by using IT5050.
SPECIFICATIONS
Model : IT5050
Frequency Range: 30kHz - 1000MHz
Impedance : 50 ohrms
Connectors : BNCJ - BNCP
Case dimenstions : 40 x 30 x 20 mm (approx.: excluding projections)
Weight : 45g. (approx.)
EAN / JAN : 4573533000213
Click here to view
IT5050 Japanese/English Instruction Sheet
IT5050 Frequency response (30kHz - 300MHz)
IT5050 Frequency response (30kHz - 1000MHz)
Example of receiving LW-MW AIRSPY+HF discovery without IT5050
Example of receiving LW-MW AIRSPY+HF discovery WITH IT5050
Example of receiving VHF ATC AIRSPY+HF discovery without IT5050
Example of receiving VHF ATC AIRSPY+HF discovery WITH IT5050
*The noise reduction effect will depending on the reception environment
and usage conditions.
*IT5050 has excellent wideband characteristics, but there is a small signal
attenuation. In environments where no noise improvement effect is observed,
better results may be obtained by not inserting this product.
*Noise induced by the antenna (not related to ground loops) will not be attenuated.
* The circuitry is not able to transfer transmitter power. The IT5050 is
designed for receiving purposes only.
Related products, accessories
303WA-2 LW-SW receiving atenna
35BNC-AT3 antenna adapter with variable attenuator & surge arrester
35BNC-2 adapter cable with surge arrester
IT5050 galvanic Isolation Transformer
SPL-2B Antenna Splitter / Combiner
HPF2050 High Pass Filter (fc:2MHz)
VS2000N Discone antenna (100MHz - 2000MHz)
VS3000 Discone antenna (100MHz - 3000MHz)